callsfert.blogg.se

When areas of heavy use no longer respond toīuffing, wax only those areas and buff all of the floor to an even luster.ģ. Will restore the luster before re-waxing.Ģ. When floor looks dull, try buffing first to see if that Use tan polish brush or lamb’s wool bonnet to obtain a higher luster.ġ. Turn white polish pad over to clean side and buff. In a forward/back motion and spread out the paste wax to a thin coat. Place white polish pad on floor and center black drive pad holder onto pad. Of paste wax on 4 sections of white polish pad. To apply paste wax: Attach black drive pad holder to

Hint: Buff with white polish pad to restore luster.ģ. Wipe up spills with a dry cloth or paper towel. This procedure should be used on WAX FINISH floors only.Ģ. Burnish between coats with #100 grit sand screen Apply finish according to manufacturer’sĦ. Sweep and vacuum the floor, then tack ragĥ. Place a #80 sand screen disc under the brown stripĤ. Remove residue by vacuuming or sweeping the floor in the same direction as the boards.ģ. Place #60 grit sand screen disc under brown strip However, polyurethane coatings are generally very durable and look good for a long time - try a thorough cleaning before refinishing the polyurethane coating to see if the luster can be restored.Ģ. The procedure is not designed to totally remove the old polyurethane, but smooth out imperfections and prime the floor for a new fresh coating. Sandscreening is ideal for refinishing the polyurethane coating on hard wood floors. If necessary, repeat procedure until floor shines. Floors should shine with a beautiful luster.Īny streaking or clouding may be the result of a build-up of other floor cleaners. Wet floor as necessary with water or diluted Grunge Attackģ. Multi-Floor Machine and white terrycloth bonnet to remove all dirt lifted by the orange scrub brush. Go back over the cleaned floor with the Orbiter Repeat steps 1 through 3 until the whole floor hasĥ. Use Orbiterīlack carpet brush for delicate or glazed ceramic or porcelain tile floors.Ĥ. Orange scrub brush for ceramic tile floors or concrete. Lightly spray a 6 ft by 6 ft area with diluted Grunge Separate spray bottle according to the instructions on the bottle.Ģ. Grease from tile floors and grout, leaving sparkling results. Orange Scrub Brush or Black Carpet Brush.